Structure

The CIGRE Study Commitee A1 - Rotating Electrical Machines consists of Advisory Groups, Working Groups and Task Forces. Each Group reporting to the Study Committee Chairman.

At this time the Study Committee has 4 Advisory Groups, 19 Working Groups and 1 Task Force.

Chairman

Erli Ferreira Figueiredo

Secretary

Oscar Martinez


ADVISORY GROUPS
Ref Title Convener Duration
AG A1.1 Turbine Type Generators Robert Fenton Permanent
AG A1.2 Hydro Type Generators Remi Tremblay Permanent
AG A1.5 New Technologies Sameh Salem Permanent
AG A1.6 Large Motors Enzo Tortello Permanent
 
 
Working Groups - Task Forces
Ref Title Convener Dates
(Creation - Disbanding)
A1.01 Guide on Overfluxing Generators Neil Connolly 2008 - 2010
A1.02 Generator Stator Winding Stress Grading Coating Problem Remi Tremblay 2008 - 2010
A1.03 Guide on Generator/Power System Inter-relationship Issues L Rouco 2008 - 2012
A1.04 Generator Fire Protection Alexander Gromow 2008 - 2011
A1.05 Economic Evaluation of Generator Refurbishment/Replacement Sam Salem 2008 - 2012
A1.11 Guide for On Line Monitoring of Electrical Generators Dan Zlatanovic 2004 - 2010
A1.12 State of the Art of the Efficiency in Hydro-Generators Commissioned in the Last 10 Years Hector D. Pires 2009 - 2011
A1.13 Feasibility of Updating from Class F to Class H the Insulation Systems in Electrical Rotating Machines Jose L. G. Araco 2008 - 2011
A1.14 Guide for Minimizing the Damage from Stator Winding Grounds in Hydro Generators Oscar Martinez 2008 - 2011
A1.15 Guide on Stator Water Chemistry Management Francois Duffeau 2006 - 2010
A1.16 Guide on Generator Coil Retaining Ring – A Survey and General Guideline Gert Coetzee 2006 - 2010
A1.17 Methods of Determining the Condition of Stator Winding Insulation and their Effectiveness Sergio R. Ruiz 2008 - 2011
A1.18 Extending Life of Large Motors in Nuclear Power Stations M R Siniscalchi 2008 - 2010
A1.19 Motor Failure Survey V Skundric 2008 - 2010
A1.21 Bearing Segments with Plastic Lining – Operating and Maintenance Experience Lars E Kampe 2009-2011
A1.22 Guide – Consideration of Duty on Windings M Berlamont 2010 - 2011
A1.23 State of the Art and Capacity for Robotic Inspection of Turbo-Generators M R Siniscalchi 2010 - 2011
A1.24 Literature Survey on Diagnostics Trends for Wind Generators for Reliability Improvement S Salem 2010 - 2012
A1.25 Survey on Hydro-Generator Cleaning Geir Aalvik 2010 - 2013







www.cigre.org